Chmod file permission using bits.

This is the other method of giving file permission using bits.

we are having 3 different roles of symbolic representation.The representation given below:

  • user,
  • group,
  • others.

And the file/directory permissions are :

  • read permission,
  • write permission,
  • execute permission.

Numeric values for the read, write and execute permissions:

  • read 4
  • write 2
  • execute 1

Octal representation for permissions:

  • First number is for user
  • Second number is for group
  • Third number is for others

$ chmod 765 filename

In this example 7 is for user , 6 for group and 5 for others.

For example, give read, write ( 4+2 = 6 ) to user and read ( 4 ) to group and others.

$ chmod 644 filename

The table will help us to understand more about giving permissions.

          4        2           1

Read Write Execute

0       –            –          –

1       –            –          1

2       –            1         –

3       –            1        1

4       1            –         –

5       1            –         1

6       1            1         –

7       1            1         1


The umask acts as a set of permissions that applications cannot set on files. It’s a file mode creation mask for processes and cannot be set for directories itself. Most applications would not create files with execute permissions set, so they would have a default of 666, which is then modified by the umask.

Default file permission: 666

Default directory permission: 777

So if our umask value is 022, then any new files will, by default, have the permissions 644 (666 – 022). Likewise, any new directories will, by default, be created with the permissions 755 (777 – 022).

You can change the umask value to appropriate value of what you need based upon the above calculation. For example,

$ umask 077


Chmod Command for Beginners

There are two way to give file/directory permissions using bits and symbolic representation . In this article, let us discuss how to use symbolic representation with chmod.

we are having 3 different roles of symbolic representation user, group and others.The representation given below:

  • u is for user,
  • g is for group,
  • and o is for others.

we also have 3 symbolic representation of file/directory permissions. they are :

  • r is for read permission,
  • w is for write permission,
  • x is for execute permission.

And we also have +, – and = symbols :

  • + means Add,
  • – means Remove,
  • = means set the permissions exactly like this.

Following are few examples on how to use the symbolic representation on chmod.

1.Add a permission to file/directory

chmod g+w filename

Changing permission to a single set. + symbol means adding permission. Here we are giving group to write permission. Likewise you can give single permission(r/w/x) for any roles(u/g/o).

2. Remove permission from a file/directory

$ chmod u-x filename

This will remove execute permission from user.

3. Add multiple permission to a file/directory

Use comma to separate the multiple permission sets as shown below.

$ chmod u+r,g+x filename

4.Remove multiple permission from a file/directory

$ chmod u-rx filename

5. Change permission for all roles on a file/directory

$ chmod a+x filename

It will change the permission of all three roles such as user,group and others.

6. Set a permission of a file/directory

$ chmod u=w filename

7.Set multiple permission of a file/directory

$ chmod u=rwx filename

It will set the permission. This will replace the permission with given permission.

Setting Up Django on Windows


Django is a Web development framework written in Python. Therefore it has all the advantages of Python. Setting up Django in Linux is pretty straightforward, but Windows is different. This tutorial takes you through the process of installing Django in a Windows environment.I have written an Article on the topic Setting Up Django on Windows for OSFY, Open Source For You. Developers can easily setup Django in their machine. So the article is a tutorial on setting up Django on Windows.

I have shared the drive link below.

Setting Up Django on Windows


Installing Realtek rtl8723be driver for Ubuntu, Debian or Fedora

Originally written by  Chirath R

I have been searching for a fix for the wifi problems in my HP Pavillion ab-028tx. It’s having a Realtek rtl8723be Wifi Card. For a long time, there was no perfect driver for this device. I tried many drivers and none of them fixed the disconnection and low wifi range problems. At last, I found a fix from ubuntu forums. Follow these steps to get your wifi working in Ubuntu.

  • Get into your BIOS(in my case I had to press f10 after turning on my laptop). Then go into System Configuration->Boot options and Disable secure boot. This is very important as third party drivers won’t work in secure boot mode as they are not verified.
    • Save and restart(f10), open up a terminal (ctrl + alt + t) and type the following commands in order.
    • Installing new driver for the Realtek wifi chip.

    Note:  its suggested to have latest kernel installed(Linux kernel 4+).

    Step 1:

    Ubuntu :

    $ sudo add-apt-repository ppa:hanipouspilot/rtlwifi
    $ sudo apt-get update
    $ sudo apt-get install rtlwifi-new-dkms linux-firmware
    • Restart ubuntu.
    $ sudo reboot


    $  sudo apt-get install firmware-realtek

    Step 2:

    Common steps for all three OSes.

    • If you are not able to see your wifi networks, follow the steps below :
    • Download the driver by clicking “Download ZIP” from GitHub.(Note that the GitHub driver must be the master branch) or clone the driver by using the link
    • extract it to your home directory and open a terminal.
    • Execute the following commands :

    Step 3:

    Ubuntu and Debian

    $ sudo apt-get install linux-headers-$(uname -r) gcc g++ build-essential dkms git
    $ sudo reboot
    $ cd rtlwifi_new-rock.new_btcoex
    $ make
    $ sudo make install
    $ sudo modprobe -rv rtl8723be


    $ sudo dnf install kernel-devel kernel-headers
    $ cd rtlwifi_new-rock.new_btcoex
    $ make
    $ sudo make install
    $ sudo modprobe -rv rtl8723be

    Step 4:

    Common Steps

    • If you are unable to get wifi even now, change the antenna input to #2 using the command:
    $ sudo modprobe -v rtl8723be ant_sel=2
    • note : try changing ant-set=1 or 0 if it doesn’t work for u.
    • Now your Wifi will be working perfectly as in windows, now set input #2 as permanent.
    $ echo "options rtl8723be ant_sel=2 fwlps=0" | sudo tee /etc/modprobe.d/rtl8723be.conf

    And reload the module.

    $ sudo modprobe -r rtl8723be
    $ sudo modprobe rtl8723be

    Now your WiFi should be working perfectly 🙂 .

[Fedora] Add self signed certificate to list of trusted certificates


Originally written by  Jackson Isaac.

Today I am going to show you how to add a self signed certificate to the list of trusted certificates in fedora.

I was trying to install some packages on fedora and was getting SSL errors while I was connected to my university WiFi (which makes use of self signed certificate). In order to connect to my university WiFi, I need to accept and add a self-signed certificate to list of trusted certificates.

Note: Remember that adding self-signed certificates to list of trusted certificates is not recommended unless no other option is available.

We can add and trust the certificate from browser if you just want to browse the internet. But if you want connection in the complete environment i.e., terminal, browser, apps, etc. you can follow the steps mentioned below.

First we need to download the self-signed certificate from the WiFi portal or the web. For me, the certificate is available on my university intranet.

Step 1: Copy the self signed certificate to trusted certificates folder.

sudo cp /path/to/certificate.cer /etc/pki/ca-trust/source/anchors/

Remember to replace ‘/path/to’ with the folder in which your certificate is downloaded.

Step 2: Update list of trusted certificates

sudo update-ca-trust

Now you can connect to the internet via browser, terminal and other applications.

P.S.: Never do online transaction or other sensitive transactions on public WiFi.

Format USB using Terminal(Ubuntu)

All USB users face or will face the mounting problem  or formating problem. Don’t worry users . Here I have some tips for you.

The first thing you need to do.
1. Insert your USB drive into your system.

2. Open the terminal. (CTRL + ALT + T)

And type  ->  df -h
df -h For finding out where it is mounted
3.then  unmount this USB drive using the following command.

$ sudo umount /dev/sdc1
4.Now use one of the following commands as per file system you want. To format a USB drive most users prefer VFAT and NTFS file systems because they can be easily used on Windows operating system.

Format with vFat FileSystem

$ sudo mkfs.vfat /dev/sdc1
Format with NTFS FileSystem

$ sudo mkfs.ntfs /dev/sdc1

Format with EXT4 FileSystem

$ sudo mkfs.ext4 /dev/sdc1

So you are done with the formatting of pen-drive.The main use that I have by formatting the pen drive from the terminal is that we can format almost any type of pen-drive .

How to register your nickname with Freenode

Freenode is currently under an attack by spammers. To avoid this, we temporarily have to register your nickname before we can see anything you type.

This is how you register your nickname:

  1. Pick a nickname, and connect. Make sure you have a nickname that you can remember the next time you log in. If you want to change it after you have connected already, type /nick YourNewNickname
  2. Type /msg NickServ REGISTER YourPassword into the text box of the chat — including the slash at the beginning, and replace the password and email address with something you select.
  3. Type /msg nickserv REGISTER YourNickName YourPassword
  4. You will get an Mail ,it will tell you the next step(command from IRC)
  5. your freenode is registered 🙂

Every time you log in later, you will have to issue the command /msg nickserv register YourNickName YourPassword before we can see what you’re typing.